WATCH IT

Benefits:

• Unlike the majority of fire-effect devices the SAFEX-FLAMEJETTT® works with an aerosol containing the propellant / fuel mixture.
• The standard aerosol contains enough propellant to produce large numbers of flames and fireballs, ensuring only small amounts of flammable substance are on stage at one time.
• For professional use the device is equipped with DMX 512 connections (DMX-In and Slave-Out). To operate the effect three channels are necessary: an arming channel, a firing channel and a flame duration channel.
• It is equipped with pre-selectable effect programmes and can produce rhythmic tongues of flames and fireballs that can be controlled by DMX. A hand-held remote control is available for users without DMX control.
• Build quality - the unit is made from powder-coated, galvanized steel sheet to help withstand the rigours of tour use.
• Can be used alongside all other pyrotechnic effects.
• "LEVEL" sensor to detect that the unit is positioned upright. If the unit is accidentally knocked over, the unit will go into Safe Mode.

Safety Features:

• Higher safety features than comparable devices.
• It does not require specialist gas.
• A signal alert flashes 7 seconds before the effects commence.
• The aerosol can is installed into the device which self-seals to prevent leakages.
• Low risk of contents leaking - the aerosol is equipped with a valve-protecting cap.
• It is fitted with electronic safety mechanisms for both the flames and the control valves in dual redundancy.
• The two stop valves are continuously electronically checked for tightness and the electronic ignition has a safety insulating transformer so the user is able to stop a flame.
• In the unlikely case of ignition failure, the device switches off fuel supply after just one second. It will be detected and indicated as a malfunction, safely preventing output of unburned fuel.
• Microprocessor electronics continuously control all functionality, reporting faults.
• The device complies with normal fire safety standards.